Website for machine experts
Commissioning and optimization: Basic training
For the TNC 620/TNC 640/TNC7 contouring controls
Obsah školení
- Clarification of open questions related to project planning and configuration
- The control loop of the TNC
- Commissioning aids
- Optimizing the NC axes with standard drive
- Optimizing the NC axes with torque motor or linear motor
- Optimizing the spindle drive
- Setting the monitoring function
- Fundamentals of axis error compensation
Please bring your own computer or notebook, which must meet the following requirements:
- Microsoft Windows
- Zip-compatible extraction software
- Authorization to install software
- USB port with removable media access
- Ethernet connection with cable
- Configured network environment (Ethernet TCP/IP)
- PC processor supporting the AVX2 instruction set
HEIDENHAIN cannot provide any computers or notebooks for the course.
Cíl školení
- With the help of a guideline the participants are able to commission an axis or the spindle and can optimize the control loops such that a standard machine parameter set is determined
- The participants learn to work with the TNCopt computer software
- Special “customized” requirements (such as the adjustment of nominal position value filters) cannot be treated in detail
look at training TNC-OPT Workshop
Cílová skupina
- Specialists in machine adaptation, commissioning and service from machine tool builders and retrofitters
Předpoklady
- Solid background in NC-controlled machine tools
- Knowledge of electronics / electrical engineering
- Machine configuration is already finished
Místo školení
HEIDENHAIN Training Center, Traunreut
Further providers/locations see button "Training worldwide"
Cena školení
€ 2,100 plus VAT per participant
Délka školení
4.5 days
Monday 8:00 a.m. to
Friday approx. 12:00 noon
Počet účastníků
Maximum 8
Commissioning and optimization: Basic training
For the TNC 620/TNC 640/TNC7 contouring controls
- Clarification of open questions related to project planning and configuration
- The control loop of the TNC
- Commissioning aids
- Optimizing the NC axes with standard drive
- Optimizing the NC axes with torque motor or linear motor
- Optimizing the spindle drive
- Setting the monitoring function
- Fundamentals of axis error compensation
Please bring your own computer or notebook, which must meet the following requirements:
- Microsoft Windows
- Zip-compatible extraction software
- Authorization to install software
- USB port with removable media access
- Ethernet connection with cable
- Configured network environment (Ethernet TCP/IP)
- PC processor supporting the AVX2 instruction set
HEIDENHAIN cannot provide any computers or notebooks for the course.
https://www.klartext-portal.com/cz/schulungen/schulungsprogramm/popis-kurzu/seminare/374
B TNC-OPT en 29.07. - 02.08.2024, week 31
2024-07-29
2024-08-02
HEIDENHAIN Training Center, Traunreut
Further providers/locations see button "Training worldwide"
2100
3
https://www.klartext-portal.com/cz/schulungen/schulungsprogramm/popis-kurzu/seminare/374
Kontakt
Helpline