Prerequisites regarding the PC in order to use StateMonitor
- The StateMonitor software must be installed on a PC with Windows operating system (host for StateMonitor)
- The hardware prerequisites for the PC depend on the number of machines to be connected. Refer to the Installation Instructions for the recommended hardware settings
- The HEIDENHAIN controls to be connected must be accessible from the host through the IP address or DHCP name
Prerequisites regarding the NC control in order to use StateMonitor
- HEIDENHAIN controls must have HEIDENHAIN DNC (option 18)
- Enabling of HEIDENHAIN DNC (option 18) is not part of the StateMonitor software package
The following HEIDENHAIN controls can be connected:
- iTNC 530 as of software version 340490-03 (released in 2006)
- All NCK controls with option 18 (TNC 640, TNC 620, CNC PILOT 640 etc.; the StateMonitor documentation includes a complete list)
Additionally, other controls can be connected over the following protocols:
- OPC-UA software version 1.02.x or later
- MT Connect software version 1.2.x or later
- Modbus TCP via Connect/Read
- FANUC FOCAS via Ethernet