0  BEGIN PGM 1070_EN MM 
1  ;Program for a drilling operation in which
2  ;the tool is moved into a pilot hole
3  ;before machining begins.
4  ;The tool moves into the pilot hole
5  ;with leftward rotation at a speed
6  ;to be defined separately.
7  ;
8  FN 0: Q1 =+0 ;COORDINATE SURFACE
9  FN 0: Q2 =-20 ;DEPTH OF PILOT HOLE
10 FN 0: Q3 =-10 ;RETRACTION HEIGHT FOR CHIP BREAKING
11 FN 0: Q4 =+2000 ;FEED RATE FOR ENTRANCE
12 FN 0: Q5 =+200 ;FEED RATE FOR DRILLING
13 FN 0: Q14 =+100 ;SHAFT SPEED OF ENTRY
14 FN 0: Q6 =+2000 ;ROTATION SPEED FOR DRILLING
15 FN 0: Q7 =+5 ;PLUNGING DEPTH
16 FN 0: Q8 =-76 ;DEPTH
17 FN 0: Q9 =+0.5 ;DWELL TIME AT DEPTH
18 FN 0: Q10 =+1 ;RETRACTION FOR CHIP BREAKING
19 FN 0: Q11 =+2 ;SAFETY CLEARANCE
20 FN 0: Q12 =+30 ;2ND SAFETY CLEARANCE
21 FN 0: Q13 =+2 ;NUMBER OF CHIP BREAKS UNTIL CHIP REMOVAL
22 ;
23 BLK FORM 0.1 Z X+0 Y+0 Z-70
24 BLK FORM 0.2  X+50  Y+50  Z+0
25 ;
26 ;Drill tool call
27 TOOL CALL 237 Z
28 ;
29 ;Definition of program 10701_en.h as cycle
30 CYCL DEF 12.0 PGM CALL
31 CYCL DEF 12.1 PGM 10701_en.h
32 ;
33 ;Moving to positions and cycle call
34 L  X+25  Y+25 R0 FMAX M99
35 ;
36 ;Moving to safe height and program end
37 L  Z+50 FMAX M2
38 END PGM 1070_EN MM